返回首页

保定市复合管厂

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
SHS-自蔓燃陶瓷复合管特点
添加时间:2018/7/2 17:22:21     浏览次数:
SHS-自蔓燃陶瓷复合管特点
Characteristics of SHS- self burning ceramic composite pipe
1、耐磨性好
1. Good wear resistance
陶瓷复合管由于内衬层为刚玉陶瓷(a-AL2O3),莫氏硬度可达9.0相当于HRC90以上。因此对冶金、电力、矿山、煤炭等行业所输送的磨削性介质均具有高耐磨性。经工业运行证实:其耐磨寿命是淬火钢的十倍甚至几十倍。
The ceramic composite pipe is made of corundum ceramic (a-AL2O3) and the Mohs hardness is 9 or more than HRC90. Therefore, the grinding media for metallurgy, power, mining, coal and other industries all have high wear resistance. It has been proved by industrial operation that its wear life is ten times or even tens of times of hardened steel.
2、运行阻力小
2, the running resistance is small
SHS陶瓷复合管由于内表面光滑、且永不锈蚀,也不象无缝钢管内表面有凸状螺旋线存在。经有关检测单位对内表面粗糙度及清水阻力特性测试,其内表面光滑度优于任何金属管道,清阻力系数为0.0193,比无缝管稍低。因此该管具有运行阻力小等特点,可减少运行费用。
Because the inner surface of SHS ceramic composite pipe is smooth and will never rust, it is not like the existence of convex helix in the inner surface of seamless steel tube. After testing the inner surface roughness and the resistance characteristics of the water, the inner surface smoothness of the testing unit is better than that of any metal pipe, and the drag coefficient is 0.0193, which is slightly lower than that of the seamless tube. Therefore, the tube has the characteristics of small running resistance and can reduce operation cost.
3、耐腐蚀、防结垢
3, corrosion resistance and anti scaling
由于该钢陶瓷层为(a-AL2O3),属中性特质。因此具有耐酸碱和耐海水腐蚀,并同时具有防垢等特性。
Because the steel ceramic layer is (a-AL2O3), it belongs to the neutral character. Therefore, it has the characteristics of acid and alkali resistance and seawater corrosion resistance as well as scale prevention.
4、耐温性能与耐热冲缶性能好
4. Good temperature resistance and heat resistance.
由于该刚玉陶瓷(a-AL2O3),为单一稳定的晶态组织。因此复合管可在-50--700℃温度范围内长期正常运行。材料线膨胀系数6-8×10-6/0C,约为钢管的1/2左右。材料具有良好的热稳定性。
The corundum ceramic (a-AL2O3) is a single stable crystalline structure. Therefore, the composite pipe can run normally for a long time at -50--700 C temperature range. The linear expansion coefficient of the material is 6-8 * 10-6/0C, about 1/2 of the steel tube. The material has good thermal stability.
5、工程造价低
5. Low cost of Engineering
陶瓷复合管重量轻,价格适宜。比同内径的铸石管重量轻50%;比耐磨合金管重量轻20-30%,且耐磨、耐蚀性好,因为使用寿命长,从而支吊架费用、搬运费、安装费以及运行费用降低。经有关设计院和施工单位工程预算和工程实际比较,该管工程造价与铸石相当,与耐磨合金管相比,工程造价下降20% 左右。
The ceramic composite pipe is light and the price is suitable. The weight of the cast stone tube is 50% lighter than that of the same diameter; it is 20-30% lighter than the wear-resistant alloy tube, and is wear-resistant and corrosion-resistant, because the service life is long, and the cost of the hanger, the handling fee, the installation fee and the operating cost are reduced. Compared with the engineering budget and engineering practice of the design institute and the construction unit, the cost of the pipe is equivalent to that of the cast stone, and the cost of the project is reduced by about 20% compared with the wear-resistant alloy pipe.
6、安装施工方便
6. Convenient installation and construction
由于该管重量轻,且焊接性能好。因此可采用焊接、法兰、快速联结等方式,施工安装方便,且可减少安装费用。
Because of the light weight of the tube and good welding performance. Therefore, welding, flange and quick connection can be used to facilitate installation and installation, and reduce installation costs.
上一页  离心浇铸复合陶瓷管道  
下一页  陶瓷复合管种类
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 产品分类1
  • 产品分类2
  • 产品分类3