| 陶瓷复合管种类 |
| 添加时间：2018/7/2 17:00:25 浏览次数： |
| 陶瓷复合管种类 Type of ceramic composite pipe 离心浇铸复合陶瓷管道 Centrifugal casting composite ceramic pipe 离心浇铸复合管是采用“自蔓燃高温合成-高速离心技术”制造的复合管材，在高温高速下形成均匀、致密且表面光滑的陶瓷层及过渡层。另外工作常温850～900度陶瓷都不会掉落,重量较轻,复合陶瓷以硬度防磨,解决过去以厚度防磨。直管、弯头、弯管、三通等在磨损严重行业使用效果非常好。 The centrifugal casting composite pipe is a composite tube made of "self burning high temperature synthesis high speed centrifugation", which forms a uniform, compact and smooth surface ceramic layer and transition layer at high temperature and high speed. In addition, 850~900 degree ceramics at normal temperature will not drop and the weight is lighter. The composite ceramics can be worn out by hardness and wear resistance. Straight pipe, elbow, elbow and three links are very effective in wear and tear industry. 贴片耐磨陶瓷管道 Patch wear-resistant ceramic pipe 贴片耐磨陶瓷管道是用耐高温强力粘胶将氧化铝陶瓷片粘贴在管道内壁，经加温固化后形成牢固防磨层。制作工艺简单，成本较高,。使用温度一般不能超过100度,不适合管道. The wear-resistant ceramic pipe is pasted with high temperature and strong viscose to make alumina ceramic piece into the inner wall of the pipe, and then solidified to form a firm anti abrasion layer. The production process is simple and the cost is high. The temperature should not exceed 100 degrees and is not suitable for pipes. 点焊装卡式 Point welding card 点焊装卡式耐磨陶瓷管道是用耐高温强力粘胶将中间带孔的氧化铝陶瓷片粘贴在管道内壁，同时配合点焊工艺透过小孔将陶瓷牢固地焊接在钢管内壁。为保护焊点，上面再旋上陶瓷盖帽。每块瓷片不但互压互插，而且每块瓷都形成梯形角度，使瓷块之间紧密连接，无缝隙；当一圈的最后一块紧密嵌入后，瓷块之间形成360°的机械自锁力（这种技巧在几个世纪前就被运用在中国桥梁建筑工程上）。铆钉式连接，金属需要用磁力钻或钻孔机穿透，然后再用铆钉与互压式带孔耐磨陶瓷片和金属连接, [1] 该种产品制作工艺相对复杂，制作周期较长，成本较高。 The point welding wear resistant ceramic pipe is bonded on the inner wall of the pipe with high temperature resistant adhesive adhesive, and it is firmly welded to the inner wall of the steel pipe through the small hole through the spot welding process. To protect the solder joints, the ceramic cap is swirled on it. Each piece of porcelain pieces not only press and intercalate each other, but each piece of porcelain forms a trapezoid angle so that the porcelain blocks are tightly connected and seamless, and the 360 degrees of mechanical self locking between the pieces of porcelain are formed between the last pieces of one circle, which is applied to the Chinese Bridge Construction projects a few centuries ago. The rivet connection, the metal needs to be penetrated by magnetic drill or drilling machine, and then reused the rivet with the cross pressure type wear-resistant ceramic plate and metal. The production process of the [1] product is relatively complex, the production cycle is longer and the cost is higher. |
| 上一页 SHS-自蔓燃陶瓷复合管特点 |
| 下一页 陶瓷内衬复合管制作工艺 |
Copyright © 技术支持：遨游网络