| 高耐磨陶瓷贴片复合管的技术要求和技术参数 |
| 添加时间：2019/8/2 16:22:51 浏览次数： |
| 洛氏硬度HRA≧85 Rockwell hardness HRA (> 85) 氧化铝含量≧95％ Alumina content (> 95%) 陶瓷厚度≧12 Ceramic Thickness (> 12) 正常运行温度80°-100℃，特殊情况下不超过350℃ Normal operating temperature 80 100 under special circumstances, not more than 350. 外钢管材质Q235或Q345 External steel pipe material Q235 or Q345 采用进口耐热粘合剂 Using imported heat-resistant adhesives 每相邻的陶瓷块的高低差应小于0.5毫米 The height difference of each adjacent ceramic block shall be less than 0.5 mm. 陶瓷块的拼接处的间隙不得大于0.5mm The gap between joints of ceramic blocks shall not be greater than 0.5mm 连接方式有：法兰、V型连管器、管接头 Connection modes include flange, V-type pipe connector and pipe joint. 焊接缝口采用氩焊焊无气泡，法兰焊接处需要倒角处理 Argon welding is used to weld seam without bubbles, and chamfering treatment is needed at flange welding place. 耐磨性能好，使用寿命达至10年 Good wear resistance, service life up to 10 years |
| 上一页 是一种具有世界先进技术的输送管道用新型材料 |
| 下一页 陶瓷内衬复合管的制作是基于铝热反应 |
Copyright © 技术支持：遨游网络